1. Quenching When quenching and heating in a salt bath furnace, the springs should be evenly bundled with iron wires, or the springs should be heated on the mandrel. When heating, ensure that the surface of the spring is oxidized and decarburized. Salt baths should be carefully deoxygenated. It can also be heated in a box-type furnace with a controlled atmosphere. The heating temperature is 850 degree C ± 10 degree C, and the temperature is kept for 1015 minutes, and the quenching oil is cooled through the furnace.
2. Cần phải nổ mìn để cải thiện độ bền mỏi của lò xo. Đường kính của đạn là 0. 3 0. 5mm. Khi sử dụng phun khí nén, áp suất khí nén là 0,40,5MPa; với một vụ nổ bắn ly tâm, vận tốc thẳng của đạn là 70m / s. Tuổi thọ của lò xo nén được xử lý bằng cách nổ bắn có thể tăng hơn gấp đôi.
3. Sau khi ủ kết tinh lại lò xo nén được cuộn và tạo hình, nó phải được kết tinh lại và ủ để ổn định kích thước hình học của lò xo và giảm biến dạng trong quá trình dập tắt. Nhiệt độ ủ kết tinh lại là 550650 độ, và nhiệt độ được giữ trong 11,5 giờ và sau đó làm mát bằng không khí -. Một lượng nhỏ có thể được thực hiện trong lò ngâm muối, và một lò điện trở liên tục có thể được sử dụng để kiểm soát khí quyển với số lượng lớn.
4. Tempering can be carried out twice after tempering and quenching. Correction and tempering should be carried out first. The temperature of correction and tempering should generally be lower than the final tempering temperature by about 20 degree , and the temperature should be kept for 10-15 minutes. The final tempering is then carried out, and after the spring size is corrected, the spring is mounted on the tempering jig for final tempering. The tempering fixture should ensure that the pitch and free length of the spring meet the requirements. The tempering temperature is 420 degree ±10 degree , the temperature is kept for 3035min, and the furnace is water-cooled.
